![]() ![]() the digital bits worked fine, but the sound was out of tune). I think I've only ever had one thing which didn't work properly (an analogue synthesizer with a rare AC power supply that depended on the line voltage for tuning. electronics products here without problems. I've lived in Japan for a long time and used tons of U.S. The other issue, frequency, is not a problem for most electronics, as they generally convert to DC immediately anyway (it may be an issue for older clocks or anything with a motor driven off of AC). I've even corresponded with an electronics maker who confirmed this for his product, saying that most power supplies are intentionally designed with a big safety margin to handle brownouts and out-of-spec power anyway, and that the U.S.-Japan difference easily falls within this margin. Most DC power supplies have enough latitude that they handle the difference without problems. Japan is on the list of countries that use the Type B. Japanese sockets are (mostly) physically compatible with American plugs, and although the nominal line voltage is lower in Japan (100V), the vast majority of modern electronics goods intended for American line voltage (110V) work just fine in Japan. If youre traveling to a country that uses a Type B outlet, your US device may already be raring to go. In practice, the answer is "yes, usually." If it's OK in the U.S., there's a very good chance it will work without issues in Japan. Check the sticker on the power supply for the "input power" requirements. Items that are made to be portable or for travel work in most cases. As a very basic rule of thumb: items that have a high ampere requirement (hair driers, toasters etc) will not work. ![]() If not, you can still try to get an alternative device in Japan for the time you are there. If you plug it in, it will simply work - or not. Before traveling to Japan, check your electrical appliances carefully and consider a converter if necessary. Whether your device is compatible with electrical outlets and power plugs in Japan depends on the frequency and voltage in your country. The other way round would fry your device in most cases. In brief, electrical outlets in Japan allow 100V voltage and 50 or 60 Hz frequency. The good thing when going from Europe (240v) to Japan (100v) is that you most likely will not ruin your equipment if you plug it in and it cannot work with 100v. Also, you must consider that different parts of Japan use different mains frequencies: 60 Hz which is used in the USA, and 50 Hz which is used in Europe. or only 240v, then there is high chance that it will NOT work in Japan. If the label on the device says for example 100-240v, 50/60 Hz (as it says on most laptop power supplies), it WILL work in Japan. However, you will have to check with each device that you want to use if they support the voltage and mains frequency that you get in Japan out of the power socket. If you have an adapter that is made for the USA, then yes, in most cases you will be able to plug in that adapter in terms of physical shape into sockets in Japan. *country compatibility type reference key.You need to distinguish between the physical plug shape and the voltage requirements of the device that you want to plug in. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |